Problem 53-9
Source: Problem prepared by the author of the site.
Determine, based on the Figure 53-09.1, the values of:
a) the current I;
b) the voltages Vb and Vc.
Figure 53-09.1
Solution of the Problem 53-9
Item a
One of the methods we can use to solve this problem is Kirchhoff's law
for tensions. Let's base ourselves on the circuit shown in the Figure 53-09.2 and build the system
equations in the direction of the brown arrows.
Figure 53-09.2
For gmesh 1, we have:
(30 - j10) I1 - 10 I2 - 20 I3 = 0
For mesh 2, we have:
-10 I1 + (10 - j20) I2 - (-j20) I3 = 40 ∠0°
For mesh 3, we have:
-20 I1 - (-j20) I2 + (20 - j25) I3 = 0
Therefore, we managed to construct a system of three equations with three unknowns. For
To solve this system the best way is to employ a graphing calculator such as
HP, Texas, Sharp, etc ... or a software like Matlab, MathCad, or even a free,
as is the case with Octave, which is 95% compatible with Matlab. we can access
the Octave page and download at
link to Octave HERE
Using Octave, the results for I1, I2
and I3, are:
I1 = - 0.2546 + j 2.7905 = 2.8021 ∠+95.21°
I2 = 1.008 + j 3.7878 = 3.9196 ∠+75.10°
I3 = 0.5093 + j 2.4191 = 2.4721 ∠+78.11°
From the circuit we can conclude that:
I = I2 = 1.008 + j 3.7878 = 3.9196 ∠+75.10°
With this result we conclude that the current I is ahead of 75.10°
in relation to the voltage that the source supplies to the circuit, characterizing a predominance
capacitive.
Item b
With these data in hand, we can calculate Vb and Vc.
To do so, we must calculate the currents flowing through the capacitors of -j20 and - j5.
In capacitor - j5 the current is I3 itself. Then, applying
Ohm's law, we have:
Vc = 5 ∠-90° x 2.4721 ∠+78.11° = 12.3605 ∠-11.89°
Notice that we changed -j5 into 5 ∠-90°. To determine the current
that circulates through the capacitor -j20 we must look at the last circuit and conclude
that Ij20 (let's call it that) equals
Ij20 = I2 - I3. Making the calculation let's
find the value of
Ij20 = 0.4987 + j1.3687 =   1.4567 ∠+70°.
Now, let's calculate the value of Vb by applying, once again, the
Ohm's law.