Problem 12-12 Source:
Problem 4.28 - page 170 - IRWIN, J. Davis -
Book: Circuit Analysis in Engineering - 4ª Edition - Ed. Pearson - 2013.
Calculate the value of Vx and the voltage Vo.
Figure 12-12.1
Solution of the Problem 12-12
As can be seen in the circuit above, there is a current source of 2 A
in series with a resistor
of 2 Ω between points a - e. This
resistor can be removed from the circuit, as it will
not affect the calculations. On the other hand,
there are two more 2 A current sources connecting
points
e - f and points f - g. Thus, it is clear that no electric current will pass through
the resistor
of 1 Ω connecting points b - e and the resistor of
2 ohms connecting
points c - f.
Therefore, they can be removed from the circuit.
Figure 12-12.2
In the circuit shown in Figure 12-12.2, you can see how the circuit turned out. The current passing through the 1 Ω
resistor, in which we want to determine the voltage Vo, is called Io.
Thus,
through the resistor of 1 Ω that connects points g-d,
a current of
will flow 2 - I0. So, obviously, Vx = 2 - I0.
The current passing through the 1 ohm resistor connecting point a to ground is called I.
The dependent current source 2 Vx is replaced by
4 - 2 I0.
In Figure 12-12.3 we have the circuit with the identification of the other currents.
Figure 12-12.3
Note that we have two unknown currents: I and I0. Therefore,
to solve the system, we need to obtain two different equations that relate these
unknowns. To do this, in Figure 12-12.4 we draw two loops: one is highlighted by the
green arrow; the other is highlighted by the purple arrow.
Figure 12-12.4
Applying Kirchhoff's law for voltages to these loops and remembering that the
sum of the voltages in the components that make up the circuit must be equal to zero, we have
for the path highlighted by the green arrow the equation:
I + 2 I - 4 + 2 + I - 2 I0 + 6 + I - 3 I0 = 0
For the path highlighted by the purple arrow, we have the equation:
-6 - I + 3 I0 - 12 - 2 + I0 + 3 I0 = 0
Rearranging these two equations, we find a system of two equations with two unknowns that is easy to solve, namely:
5 I0 - 5 I = 4
7 I0 - I = 20
Solving the system, we find the values of the currents, or:
I0 = 3.2 Aand I = 2.4 A
With these values, we can easily calculate the values
of Vx and V0, because: