Problem 13-15 Source:
Problem 4.28 - page 170 - IRWIN, J. Davis -
Book: Circuit Analysis in Engineering - 4ª Edition - Ed. Pearson - 2013.
Calculate the value of Vx and the voltage Vo in the circuit shown in Figure 13-15.1.
As we can see in the circuit shown in Figure 13-15.1, we have a current source of 2 A
in series with a resistor of 2 Ω between points a - e. This
resistor can be removed from the circuit, as it will not affect the calculations. On the other hand, we also
have two 2 A current sources that connect points
e - f and f - g.
Thus, it is clear that no electric current will pass through the resistor
of 1 Ω, which connects points b - e, and the resistor of
2 Ω, which connects points c - f.
Therefore, they can be removed from the circuit.
The circuit can be seen in Figure 13-15.2. The current
that passes through the 1 Ω resistor and in which the voltage V0 is to be determined is called I0.
Thus, a current of 2 - I0 will flow through the 1 Ω resistor that connects points g-d. So,
obviously, Vx = 2 - I0.
The current passing through the 1 Ω resistor that connects point a
to ground was denoted as I. Let's replace the dependent current source 2 Vx with
4 - 2 I0. The circuit with the identification of the other currents is shown in Figura 13-15.3.
Note that there are two unknown currents: I and I0. Therefore, to solve the system,
we must obtain two different equations that relate these unknowns. To do this, in Figure 13-15.4, we draw
two loops: one is highlighted by the green arrow and the other is highlighted by the purple arrow.
Applying Kirchhoff's voltage law to these loops and remembering that the sum of the voltages across the components
that make up the circuit must be equal to zero, we have for the path highlighted by the green arrow the equation:
For the path highlighted by the purple arrow, we have the equation:
Rearranging these two equations, we find a system of two equations with two unknowns
that is easy to solve, that is:
Solving the system, we find the values of the currents, or:
Given these values, we can easily calculate the values of
Vx and V0, because: