Problem 2.22 Source:
Problem developed by the author of the site.
Calculate the equivalent resistance that the circuit shown in Figure 02.22.1 offers to the voltage source V.
Figure 02-22.1
Solution of the Problem 2.22
To solve this problem, it's always a good idea to remember the equation
that allows you to calculate the equivalent resistance of a parallel circuit
formed by two resistors. See the eq. 02-4a.
eq. 02-4a
As illustrated in Figure 02.22.2, we will first calculate
the equivalent resistance of the part of the circuit highlighted in yellow.
Note that there are three sets of resistors in parallel.
At the top, we have a 10 ohms resistor in series with another 20 ohms.
Adding them together yields 30 ohms.
In the lower branch, we have three resistors in series:
one 16 ohms and two 10 ohms. Adding them together yields 36 ohms. We are then left with three
resistors in parallel. To calculate the equivalent value of this arrangement, we will use two
resistors at a time, that is, a parallel between 30 ohms and 20 ohms, yielding 12 ohms. Now,
we will use a parallel between 12 ohms and 36 ohms, yielding 9 ohms.
Figure 02-22.2
We need to
calculate the part of the circuit highlighted in green. Note that, on the right, we have
three resistors in series. Therefore, we can add the values and obtain
the equivalent resistance of this branch, that is,
35 + 15 + 10 = 60 ohms. With this value,
we can now calculate the equivalent resistance of the parallel between
this 60 ohms resistor and the 20 ohms resistor. As a result, we obtain 15 ohms.
To arrive at this value, we use the equation mentioned above.
Now, all that's left is to add 6 ohms to the value found,
and thus we calculate the equivalent resistance value of the part of the circuit
highlighted in green. The total value is 21 ohms. So, simply
add this value to the value found in the circuit highlighted in
yellow, since both circuits are in series. Since we found 9 ohms for the circuit
highlighted in yellow, adding it to 21 ohms, we obtain 30 ohms.
Figure 02-22.3
See Figure 02.22.3 to see what the circuit looks like after the simplifications. Let's simplify the circuit even further.
Let's calculate the equivalent value of the circuit highlighted in yellow. To the left of the circuit highlighted
in yellow, we have two resistors in series: one of 22 ohms and the other of 38 ohms, totaling 60 ohms.
Now, we can calculate the equivalent resistance of this resistor in parallel with the 30 ohms resistor,
resulting 20 ohms.
In the circuit highlighted in green, we have two resistors
in series: one of 8 ohms and the other of 4 ohms, totaling 12 ohms. Thus, calculating
the parallel between 6 ohms and 12 ohms, we find the value of 4 ohms.
Figure 02-22.4
Thus, in Figure 02.22.4, we see the circuit significantly reduced, and notice how easy it is to calculate
the total resistance the circuit offers to the voltage source. Simply add them together,
since they are all in series. See the final result below.